View LTE480WQ-F01_137823.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Approval
www..com
TO : SONY DATE : Feb. 12, 2006
SAMSUNG TFT-LCD
MODEL NO. :LTE480WQ-F01
Customer Approval
Any Modification of Spec is not allowed without SEC's permission.
Approved by :
Se Chun, Oh
LCD DIVISION Samsung Electronics Co . , LTD.
Doc . No LTE480WQ-F01 Rev.No 000 Page /27
Approval
www..com
Revision History
Rev. No. Page Summary
Date
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
Contents www..com
General Description 1. Absolute Maximum Ratings
1.1 Absolute Ratings Of Environment 1.2 Electrical Absolute Ratings
-------------------------- (4) -------------------------- (6)
2. Optical Characteristics 3. Electrical Characteristics
3.1 TFT-LCD Module 3.2 Back-light Unit 4.. Block Diagram
------------------------- (8) ------------------------ (11)
-------------------------- (13)
4.1 TFT-LCD Module(Interface System Structure) with Back Light Unit 4.2 Back-light Unit
5. Input Terminal Pin Assignment
-------------------------- (14)
5.1 Input Signal & Power 5.2 Input Signal, Basic Display colors and Gray Scale of Each Colors 5.3 Pixel Format
6. Interface Timing 7. Power On/Off Sequence 8. Outline Dimension 9. Packing 10. Marking & Others 11. General Precaution
11.1 11.2 11.3 11.4 Handling Storage Operation Others
----------------------------------------------------------------------------------------------------------------------------------------------------------
(17 (22) (23) (24) (25) (26)
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
General Description
www..com
* Description LTE480WQ-F01 is a TMR(Transmissive with Micro Reflective) type color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching devices. This model is composed of a TFT-LCD module, a driver circuit and a back-light unit. The resolution of a 4.8" contains 480x272(RGB) dots and can display up to 16.7M colors. * Features - triple-gate & Dual ASG - Transmissive with Micro Reflective type and back-light with eight LEDs are available. - TN(Twisted Nematic) mode. - Dot inversion mode. - 24bit RGB Interface - DE(Data Enable) & SYNC mode - DE, Vsync, Hsync, DOTCLK * Applications - Display terminals for PMP(Portable Multimedia Player) , Portable CNS(P-CNS) , MP3 application products. - Display terminals for AV application products.
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
www..com
* General information Items Display area Driver element Display colors Number of dots Pixel arrangement Pixel pitch Display mode Viewing direction * Mechanical information Item Module size Horizontal(H) Vertical(V) Depth(D) Weight Min. 114.04 72.68 3.0 55.0 Typ. 114.24 72.88 3.2 60.0 Max. 114.44 73.08 3.4 65.0 Unit mm mm mm g Note (1) (1) (2) Specification 105.84 X 59.98 (4.8" diagonal) a-Si TFT active matrix 16,777,212 480(H) x 272 x RGB(V) RGB stripe 0.2205 x 0.2205 Normally White 6 Unit mm colors dot mm o'clock Note -
Note (1) Not include FPC. Refer to the Outline Dimension in the "8. Outline Dimension" for further information. (2) Module and Back-light unit are included.
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
www..com
Absolute Ratings Of
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
1.2 Electrical Absolute Ratings www..com (1) TFT-LCD Module
(Ta = 25 2C, VSS=GND=0)
Item Input voltage
Symbol VDD
Min. -0.3
Max. 4.6
Unit V
Note -
(2) Back-Light Unit
(Ta = 25 2C)
Item Current
Symbol IB
Min. -
Max. 25
Unit. mA
Note (1)
Note (1) Permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded. Functional operation should be restricted to the conditions described under normal operating conditions.
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
2. Optical Characteristics
www..com
The following items are measured under stable conditions. The optical characteristics should be measured in a dark room or equivalent state with the methods shown in Note (1). Measuring equipment: SR3, BM-7, EZ-Contrast
(Ta=25 2C , VDD=2.5V or 3.3V , fv=60Hz , fDCLK=9.2MHz , IL=20mA)
Item Contrast ratio (Center point) Luminance of white (Center point) Response time Rising Falling White Color chromaticity (CIE 1931) Red Green Blue Hor. Ver.
Symbol Condition C/R YL TR TF Wx Wy Rx Ry Gx Gy Bx By
L R H L
Min. 200
Typ. 400 350 5 25 0.320 0.345 0.605 0.358 0.337 0.568 0.152 0.128 65 65 50 55 6053
Max. 15 30 0.350 0.375 0.635 0.388 0.367 0.598 0.182 0.158 8135
Unit cd/ msec
NOTE (1) =0 =0 Normal Viewing Angle B/L On
280 0.290 0.315 0.575 0.328 0.307 0.538 0.122 0.098 60 60 45 50 4906
Note (2) SR3 (3) SR3 (4) BM-7
-
(5) SR3
Viewing angle
C/R 10 B/L On
Degrees
(6) Ez-Contrast
Color temperature
-
-
K
SR3
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
Note (1) Test Equipment Setup
www..com
After stabilizing and leaving the panel alone at a given temperature for 10 min , the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. 10 min after lighting the back-light. This should be measured in the center of screen. Environment condition : Ta = 25 2 C Back-Light On condition
Note (2) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point
CR =
G max G min
* Gmax : Luminance with all pixels white * Gmin : Luminance with all pixels black
Note (3) Definition of Luminance of White : Luminance of white at the center point (@ )
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
Note (4) Definition of Response time : Sum of
www..com
Tr ,Tf
White(TFT OFF)
Display data
White(TFT OFF)
Black(TFT ON)
TR Optical Response 100% 90%
TF
10% 0% Time
Note (5) Definition of Color Chromaticity (CIE 1931) Color coordinate of white & red, green, blue at center point. Note (6) Definition of Viewing Angle : Viewing angle range (CR 10 )
Normal Line = 0o, = 0o L R L =90o L H 12 o'clock direction H = 90o
x
y
6 o'clock direction L= 90o
y'
x'
R =90o
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
3. Electrical Characteristics
www..com
3.1
TFT-LCD Module
Ta = 25 2C
ITEM
Symbol
Logic supply voltage Vsync Frequency Hsync Frequency Main Frequency White Power Dissipation Black
VDD fv fH fDCLK -
Min. 2.25 2.9 -
Typ. 2.5 3.3 60
Max. 2.9 3.5 70
Unit V V Hz
Note (1) (2)
-
17.26 9.2 110 115
15.0 120 125
kHz MHZ mW mW
(3),(4)
Note (1). PWRSEL = Low Note (2). PWRSEL = High Refer to the "5. Input Terminal Pin Assignment" Note (3). fV=60Hz, fDCLK=9.2MHZ, VDD=2.5V or 3.3V Note (4). Power Dissipation check pattern
a) White Pattern
b) Black Pattern
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
3.2 Back-Light unit
The back-light system is an edge-lighting type with eight white LED(Light Emitting Diodes).
(Ta=25 2C)
www..com
Item
Symbol
Min.
Typ.
Max.
Unit
Note
LEDs Current Power Consumption
IB PBL
-
18 480
20 530
mA mW
(1), (3) (2)
Note (1) Eight LEDs serial type. Note (2) Where IB = 18 mA, VB = PBL / IB.
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
4. Block Diagram
www..com
4.1
TFT-LCD Module (Interface System Structure) with Back Light Unit
4.2
Back-light Unit
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
5. Input Terminal Pin Assignment
www..com
5.1 Input Signal & Power (Connector type : 45Pin)
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
5.2 Input Signal,Basic Display Colors and Gray Scale of
www..com
DATA SIGNAL COLOR DISPLAY RED GREEN BLUE GRAY SCALE LEVEL R0 R1 R2 R3~R252 R253 R254 R255 G0 G1 G2 G3~G252 G253 G254 G255 B0 B1 B2 B3~B252 B253 B254 B255
Each Colors
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 BLACK BLUE GREEN BASIC COLOR CYAN RED MAGENTA YELLOW WHITE BLACK 0 0 0 0 1 1 1 1 0 1 GRAY SCALE OF RED LIGHT DARK 0 : : 1 0 RED BLACK 1 0 0 GRAY SCALE OF GREEN LIGHT DARK 0 : : 0 0 GREEN BLACK 0 0 0 GRAY SCALE OF BLUE LIGHT DARK 0 : : 0 0 BLUE 0 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 1 : : 0 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 1 1 0 0 0 : : 0 0 0 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 0 0 1 : : 0 1 1 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1
Note)
Definition of Gray : Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
5.3 PIXEL FORMAT
www..com
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
6. INTERFACE TIMING
www..com
6-1. Vertical timing
Operating at VDD=2.25~3.5V , Ta = -40 ~+85
Signal
Frame Frequency VSYNC(Frame) Period VSYNC Low width Vertical Display Period Vertical Back porch Vertical Front porch
Symbol
fFRM VCYC VLW VDP VBP VFP
Min.
239 1
Typ.
60 288 10 272
Max.
70 335 -
Unit
Hz H H H H H
Note
2
12 4
6-2. Horizontal timing
Operating at VDD=2.25~3.5V , Ta = -40 ~+85
Signal
HSYNC(1H) Period HSYNC Low width Horizontal Display Period Horizontal Back porch
Symbol
HCYC HLW HDP HBP HFP fDOTCLK
Min.
490 4 8 2 -
Typ.
533 41 480 45 8 9.2
Max.
605 15
Unit
DOTCLK DOTCLK DOTCLK DOTCLK DOTCLK MHz
Note
Horizontal Front porch DOTCLK Frequence
@fFRM=60Hz
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
www..com
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
6-3. AC characteristics
www..com
Operating at VDD=2.25~2.9V , Ta = -40 ~+85
Symbol Min.
10 10 10 25 25 66.7 10 10
Parameter VSYNC,HSYNC setup time ENABLE (DE) setup time ENABLE (DE) hold time DOTCLK "Low" level pulse width DOTCLK "High" level pulse width DOTCLK cycle time Data setup time Data hold time DOTCLK,VSYNC,HSYNC clock rise/fall time
Typ.
-
Max.
-
Unit
tSYNCS tENS tENH PWDL PWDH tCYCD tPDS tPDH trgbr trgbf
ns -
-
-
5
Operating at VDD=2.9~3.5V , Ta = -40 ~+85
Parameter VSYNC,HSYNC setup time ENABLE (DE) setup time ENABLE (DE) hold time DOTCLK "Low" level pulse width DOTCLK "High" level pulse width DOTCLK cycle time Data setup time Data hold time DOTCLK,VSYNC,HSYNC clock rise/fall time Symbol Min.
10 10 10 25 25 66.7 10 10
Typ.
-
Max.
-
Unit
tSYNCS tENS tENH PWDL PWDH tCYCD tPDS tPDH trgbr trgbf
ns
-
-
5
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
www..com
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
www..com
Operating at VDD=2.25~3.5V , Ta = -40 ~+85
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
7. Power On/Off Sequence
www..com
Power Supply VDD
Interface Signal
Display On/Off Signal
Power Supply for LED unit
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
www..com
Approval
9. Packing
www..com
4 32
160 Note (1) Total : Case: Approx. : 3 Kg Box: Approx. : 15.5 Kg (2) Size : Case: 490(W) x 342(D) x 58(H) Box: 505(W) x 355(D) x 312(H) (3) Place the panels in the tray facing the direction shown in the figure. (4) Place 4 tray and cover(empty tray) and pads inside the packing-case. (5) Place 5 packing-case inside the packing-box. (Affix the label) (6) Seal the packing-box. Affix the label-safety.
32
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
10. Marking & Others
www..com
A nameplate bearing followed by is affixed to a shipped product at the Specified location on each product. (1) Packing case attach
LTE480WQ-F01
32 EA
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
11. General Precautions
www..com
11.1 Handling
(a) When the module is assembled, it should be attached to the system firmly. Be careful not to twist and bend the module. (b) Refrain from strong mechanical shock and / or any force to the module. In addition to damage, this may cause improper operation or damage to the module and back-light unit. (c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch the surface harder than a HB pencil lead. (d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time, Staining and discoloration may occur. (e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth. (f) The desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane. Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction. (g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, legs or clothes, it must be washed away thoroughly with soap. (h) Protect the module from static , it may cause damage to the Integrated Gate Circuit.
(i) Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (j) Do not disassemble the module. (k) Do not adjust the variable resistor which is located on the back side. (l) Protection film for polarizer on the module shall be slowly peeled off just before use so that the electrostatic charge can be minimized. (m) Pins of I/F connector shall not be touched directly with bare hands
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27
Approval
11.2 Storage
www..com
(a) Do not leave the panel in high temperature, and high humidity for a long time. It is highly recommended to store the module with temperature from 0 to 35C and relative humidity of less than 70%. (b) Do not store the TFT-LCD module in direct sunlight. (c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent light during the store.
11.3 Operation
(a)
Do not connect, disconnect the module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence" (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.
11.4 Others
(a) The Liquid crystal is deteriorated by ultraviolet, do not leave it in direct sunlight and strong ultraviolet ray for many hours. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the panel may be damaged. (d) If the panel displays the same pattern continuously for a long period of time, it can be the situation when the image "Sticks" to the screen. (e) This panel has its circuitry FPC on the bottom side and should be handled carefully in order not to be stressed. (f) Avoid shortness between LED soldering pad.
Doc . No LTE480WQ-F01 Rev.No
000
Page
/27

▲Up To Search▲

Price & Availability of LTE480WQ-F01

	To Download LTE480WQ-F01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .